Key Features

Heavy Duty –75mm drilling in Mild steel
8-step Spindle speeds and 8step auto feeds for drilling & tapping & reaming operations
This machine may be capable of drilling & milling & tapping & honing & counter-boring & spot- facing & reaming and boring and other similar utilities
Speeds can easily change
Made of high quality & Graded cast-iron with heavy-duty ribbing to ensure very low vibration
Thread tapping operation can be done in either rotation and working depth can be control using a positive stop gauge
Double column contraction for rigidity and effortless centering
Generously proportional & well adequately ribbed base plates & column and arm for maximum rigidity and minimum deflection
The high quality of this machine and its ease of operation make it suitable for use by student or amateurs and home hobbyists as well as skilled technicians
Tapper roller facility for better sliding of drill head on arm guide
Hardened and ground gears for minimum wear and tear
Precision hardened and ground spindle
Machine Tested as per IS: 2199 – 1982 standards

Standard Accessories:

Electrical consisting of two motors, contractors, limit switches, control transformers, wiring Etc.
Instruction and Operating Manual

Box Table
Coolant Equipment consisting of Coolant Pump with motor,On/Off Switch,Built in tank,piping and Spout,
Machine Light (Without Lamp)
Drill Sleeve
Vice
Drill Chuck with key & arbor
Special T- bolts
Wooden Box Packing & Forwarding

Sr No.		Model No.	MAAN 75 x 8/1900
A		Capacity	75mm
B		Drilling Capacity in Solid
	1	In Cast Iron Having 180 BHN	90mm
	2	In Mild Steel Having 200 Mpa Tensile Strength	75mm
	3	n Steel Having 600Mpa Tensile Strength	70mm
C		Tapping Capacity	52mm
D		Light Boring Capacity	160mm
E		Drilling in Head
	1	Taper in Spindle [Morse Tapper]	MT – 6
	2	Spindle travels – Auto/Manual	325mm
	3	No. of Spindle Speeds/Range	8/20 – 1450 RPM
	4	No. of Auto Feeds	8/0.04 – 0.50
F		Electrical
	1	Power Supply	415V, 3 PH, 50Hz
	2	Drilling Head Moto	10HP [7.4Kw]
	3	Arm Elevating Motor	3HP [2.2kw]
G		Working Range
	1	Drilling Radius Min./Max.	540/1905mm
	2	Distance between base plate to Spindle Min./Max.(Spindle Retracted)	3665/1500
	3	Drilling Head Traverse Max (Manual)	1370mm
	4	Column Sleeve Diameter	830mm
	5	Vertical Traverse of Arm (Auto)	0-180DEG.
	6	Rotation of Arm (Both Side)	0-180DEG.
H		Base Plate
	1	Working surface (L x W)	1300 x 800
	2	No. of T-Slots & Nominal Size	4/22
	3	Weight of Machine with Electricals & Standard Accessories(Approx) Net/Cross	6000/7500Kg.
I		Box Table Size (LxWxH) mm	740 x 550 x 500
J		Wooden Packaging Dimension in cm [L x W x H] Approx.	304cm x 178cm x 292cm

Note : All the above designs,dimensions and details are approximate only and we reserve the right to alter them without prior notice as we are improving the design.