40mm All Geared Double Column Radial Drilling Machine (Model: Maan 40×8/1000DC)

READ MORE REQUEST A QUOTE
40mm All Geared Double Column Radial Drill Machine | Maan Technoplus

  • Features

  • Technical Specification

Key Features

  • Main Spindle is made of 'EN8' material and hardness

  • Mt-bore internally grinded

  • Accuracy and run out of 0.01 to 0.03 in main spindle shaft

  • Pinion Shaft is made of 'EN8' material and hardness

  • Provided 4-8 speeds by accurate balancing

  • Spindle sleeve-grinded

  • Work light [As per requirement]

  • Full size work table with accurate right-angled. [390x300] [Surface Grinding is available as per your requirement]

  • Tapper Roller facility for better sliding of drill head on arm guide

  • coolant system [As per requirement]

  • Adjustable depth control [with auto stop]

  • Speeds can easily change

  • Nitride hardened 'Ram'

  • All gears are made of alloy steel [Gear Material].Heat treatment [50 to 60 HRC] hardened & Lapped running in oil bath fitted with splined shafts

  • Ram is accurantely grinded and honing process is done in the bore body containing 'Ram'.

  • All the gears assemble in the machine are perfectly sized according to requirement[Precision gears]

  • All Bearing [SKF/NSK [Jspan]/NBC Bearing]

  • All Electrical parts are good quality.[Company:L&T]

  • Pinion and warm is grinded as per the sizes required

  • Double column design is heavy thickness and grinded as per the sizes required [column size: 200mm]

  • Spindle reverse and tapping control [As per your required]

  • Specially spring type balanced spindle travel

  • Auto/Manual feed options

  • The Auto feed Machanism is designed is such a manner that if incase the machine gets overloaded Or the drill bit may get locked during operation the machine will automatically start slipping that will prevent any accident or any kind of damages

  • Drilling last capacity : 42mm

  • Heavy Duty structures

  • Strongly ribbed and thick walled base having built-in coolant tank

  • Generously Proportional & Well adequately ribbed base plats and column and arm for maximum rigidity and minimum deflection

  • This machine may be capable of drilling milling tapping honing counter-boring spot facing reaming and boring and other similar process.Wooden case available on demand

  • No.1 Suppliers Worldwide
  • Certified ISO 9001:2008
  • Leading Service Provider

Standard Accessories:

  • Electrical consisting of two motors
  • Contractors & limit switch
  • R/F switch
  • Wiring Etc

 

Optional Accessories: (At Extra Price)

  • Box Table
  • Coolant Pump with Fitting
  • Machine Lamp
  • Drill Chuck with key & arbor
  • Drill Sleeve
  • Drill Vice
  • Special T-Bolts
  • Foundation Bolt
  • Service Tool
  • Wooden Box Packing & Forwarding

 

Specification in MM:

Sr No. Model No. MAAN 40x8/1000DC
A Capacity 42 mm.
B Drilling Capacity
1 In Mild Steel Having 300mpa Tensile Strength 42mm.
2 In Cast Iron having 180BHN 45mm.
C Tapping Capacity 35mm
D Drilling in Head
1 Taper in Spindle – (morse Tapper) MT – 4
2 Spindle Travels - Auto/Manual 200mm.
3 No. of Spindle Speeds/Range 8/50 – 1750 RPM
4 No. of Auto Feeds 2/0.6 - 0.15
E Electrical
1 Power Supply 415v,3ph,50hz
2 Drilling Head Motor 3hp
3 Arm Elevating Motor 0.5hp
F Working Range
1 Drilling Radius Max. 550/1000mm
2 Distance Between Base Plates to Spindle Min/Max.(Spindle Retracted) 460/1080 mm.
3 Drilling Head Traverse Max[Manual] 500 mm.
4 Vertical Traverse Of Arm[Auto] 710mm
5 Column Sleeve Diameter 200mm
6 Rotation of Arm (Both Side) 0-180DEG.
G Base Plate
1 Working surface (L x W) 860x750 mm.
2 No. of T-Slots & Nominal Size Apr-21
3 Weight Of MAchine With Electricals & Standard Accessories[Approx] Net/Cross Apr-21
H Box Table Size[IxWxH] MM 400x300x300
I Wooden Packing Dimension[LxWxH] 1500x1000x2000

 

  • Note : All the above designs,dimensions and details are approximate only and we reserve the right to alter them without prior notice as we are improving the design.
Message Us on WhatsApp